Looking for a HVAC Contractor in
Granbury, Texas?

How to Clean Split Air Conditioners

How to Clean Split Air Conditioners

Cleaning split air conditioners can be a daunting task most especially if you will take into consideration the amount of labor involved. For homeowners who want to save money, they do the job on their own than hiring someone else to perform the job. Listed here are some effective tips to make the task much easier.

Turn the Power Off and Unplug

Turning the unit off is the first thing you need to do while cleaning a split air conditioner. After turning the unit off, unplug it. Some consider this worthless because they are not aware that it can get bust because of water that seeps on the live wires since electricity is present even if the unit is switched off but not unplugged.

Blow the Air without Targeting its Air Reflectors

It is highly recommended not to wet the split air conditioner until and unless it is the least thing you can do. Take note that the air blower does a hard job in lesser time. Because of this, you need to make sure that the air pressure does not get into the unit’s air reflectors.

Utilize Cool Water When Cleaning Split Air Conditioners

Remember that hot water is hazardous most especially for the closely bound metallic plates since they might get expanded because of it. Utilize cool water while cleaning a split air conditioner, instead. Moreover, it is also advisable to utilize lots of cloth pieces. You can find wide range of air conditioner cleaning agents in the market. However, you must pick the lesser acidic one in order to prevent it from burning either the rubber or plastic inside.

Look for a Drainable Place

Courtyards, porches, and garages are among the best places to wash or clean your air split conditioners. This is because of the fact that they have proper arrangements for water drainage. Through this, you just have to wipe the water away into the drain instead of drying it out.

Use Water Proof Materials to Cover the Wires

Water proofing materials must be used in covering the unit’s electric wires. If not done, chances are the wires will get wet. As a result, the likelihood of having short circuit is very high and worst it might get burned out.

These are the steps you can follow to clean your split air conditioner properly. When you consider the steps above, you will surely get great ease while cleaning your unit on your own. As much as possible, clean your unit every three months. This way, you are guaranteed to enjoy a fresher air without sacrificing your energy bills.