Looking for a HVAC Contractor in
Granbury, Texas?

How to Choose a Heat Pump and Use It Wisely

Heat pumps use the heat energy stored in water or air to heat your home when the heat temperature drops. This type of system usually has both an indoor and outdoor component. If you are planning to purchase a new heating system, you need to consider a heat pump.

Here are the selection criteria that can help you choose the best heat pump for your home.

Product Warranty

For every homeowner or business owner, the purchase of new equipment is a huge expense. This is why it is necessary to pick a reliable system with only minimum maintenance costs. Picking products backed with best warranties brings higher level of peace of mind in terms of budget and comfort.

Proper Sizing

Undersized units are more likely to operate at full power non-stop. Oversized unit on the other will generate non-stop stop/start sequences. As a result, it will cause poor energy efficiency and premature condition of the unit.

Brands

Avoid cheap brands that do not have reputation for their quality. Among your best options, consider purchasing units built by trusted manufacturers. Also, choose manufacturers that are known for the reliability and quality of their products.

Performance Ratings

Upon choosing the right product, you can be sure that the heat pumps will generate significant energy savings. As much as possible, check the ratings when making your selection.

  • Seasonal Energy Efficiency Ratio (SEER). This measure evaluates the energy efficiency of the system over a cooling season.
  • Energy Efficiency Ratio (EER). It represents energy efficiency of the heat pumps operating in cooling mode on a yearly basis.
  • Heating Seasonal Performance Factor (HSPF). The higher the HSPF, expect greater savings as well as efficiency of the system in heating mode.

After choosing the right heat pump, you can now maximize its energy efficiency and comfort by using it wisely.

For summer cooling

  • Open windows and doors in order to create cross-draughts on the opposite side of your house.
  • Keep the heat of the sun out by drawing curtain or blinds.
  • Use the dehumidifying mode especially if the air is humid.
  • Use the ‘fan only’ mode to provide air movements if opening windows and doors are not enough.
  • Only use the cooling mode when the other methods are not enough.

For Winter Heating

  • Keep the heat through shutting curtains and doors.
  • Only heat the specific areas in your home you are using.
  • Use the timer.
  • Do not use the auto mode.
  • Set the thermostat to achieve a healthier indoor temperature.
  • Do not set the thermostat higher than you and your home need it.
  • Serve and maintain your unit as per the instructions of the manufacturer.

Understanding how heat pumps work and using them wisely can help lower the cost of your energy bills. Good thing air conditioning company in Granbury can help you choose the right heat pump for your homes. Best of all, they can provide sets of advice on how to use your heat pump wisely.


Fall Furnace Maintenance Guide

One of the main reasons for furnace failure is lack of maintenance. Good thing basic furnace maintenance does not take too much time. Take note that lack of maintenance will lead to your system running inefficiently. Even though it may continue to function, it will cost you more money in the long run. Conduct fall furnace maintenance to keep your furnace in good condition and save you money.

Here is a fall furnace maintenance guide that can help you all throughout the process.

Change the air filter.

Furnace air filters are vital parts of any HVAC unit. They help prevent dirt, dust, and other debris from accumulating inside your furnace. Also, they help improve the quality of indoor air. Replace the air filter right before turning on your furnace for the cold weather season. This is because the air filters become clogged with dust and debris that hamper the airflow and worse, it cause costly damage to the system. HVAC experts recommend checking the air filters on a monthly basis and replacing them once every three months.

Seal and insulate the ductwork.

Ductwork is responsible for transporting the heated air all throughout your home. However, it is more likely to get damaged with age. When it happens, microscopic air contaminants may affect your indoor air. This can aggravate asthma and allergy symptoms. Worst, it can negatively affect you and your family’s overall health. Tears, cracks, and other damages will reduce the performance of your furnace. One great way to address these issues is to utilize either a metal tape or mastic sealant. After that, insulate the ducts.

Clean/vacuum the floor vents.

Right after changing the air filters, cleaning the floor vents is your next task. Remove the vents’ covers using a vacuum hose attachment that is inserted inside the floor vents. Remove the debris that may be trapped inside. If you do not clean the floor vents now, chances are the debris will be pushed back into your home when your furnace begins to operate.

Things to Consider When Doing DIY Maintenance

While some of the DIY maintenance tips can help in ensuring your furnace is functioning, do not overlook a professional preventive maintenance and professional tune up. HVAC professionals have the expertise to determine the problems before they escalate into bigger ones, which is something typical homeowners could not do. Best of all, they can keep your furnace at home in tip top shape.

Contact the nearest HVAC professionals near you, as they would be able to address your furnace maintenance concerns and handle repairs on your unit. If you are unsure of what to do, professionals can do the work on your behalf. Though it might cost you some, turning to the pros is a wise decision you can make. Nothing compares to the costs that you might have to pay if you complicate the things by trying to do it yourself. Professional HVAC contractors will be able to perform proper furnace maintenance and other services your furnace may need.